【#第一文档网# 导语】以下是®第一文档网的小编为您整理的《游离肼限度》，欢迎阅读！
Limit of hydrazine— Benzaldehyde solution— Transfer 1.0 mL of benzaldehyde to a 100-mL volumetric flask, dilute with a mixture of methanol and water (9:1) to volume, and mix. Acetonitrile solution— Transfer 300 mL of water to a 1000-mL volumetric flask, dilute with acetonitrile to volume, and mix. Phosphate buffer— Dissolve 5.82 g of dibasic sodium phosphate and 3.81 g of monobasic potassium phosphate in 1000 mL of water, and adjust with either 1 N sodium hydroxide or 1 N phosphoric acid to a pH of 7.0 ± 0.1. Mobile phase— Dissolve 300 mg of edetate disodium in 300 mL of water in a 1000-mL volumetric flask. Dilute with acetonitrile to volume, mix, filter, and degas. Make adjustments if necessary (seeSystem Suitability under Chromatography 621). Standard solution— Transfer about 65 mg of hydrazine dihydrochloride, accurately weighed, to a 100-mL volumetric flask, dissolve in and dilute with water to volume, and mix to obtain a solution having a known concentration of about 0.65 mg per mL. Dilute this solution quantitatively, and stepwise if necessary, with water to obtain a Standard solution having a known concentration of about 0.325 µg of hydrazine dihydrochloride per mL. Transfer 1.0 mL of the Standard solution to a 10-mL reaction vessel. Add 4.0 mL of Benzaldehyde solution, and shake by mechanical means for 20 minutes. Transfer 2.0 mL of this solution to a 5-mL volumetric flask, dilute with Acetonitrile solution to volume, and mix. Test solution— [NOTE—Condition the extraction column specified in this procedure in the following manner. Wash the column with two 2.0-mL portions of hexanes, and dry with the aid of vacuum for two minutes. Wash the column with two 2.0-mL portions of methanol, two 2.0-mL portions of water, and two 2.0-mL portions of pH 7.0 phosphate buffer. At no time after the hexanes wash should the column be allowed to dry out.] Transfer about 20 mg of Hydralazine Hydrochloride, accurately weighed, to a 10-mL reaction vessel, and dissolve in 1.0 mL of water. Add 4.0 mL of Benzaldehyde solution, and shake by mechanical means for 20 minutes. Pipet 2.0 mL of this solution into a freshly conditioned solid phase extraction column containing benzenesulfonic acid strong cation-exchange packing with a sorbent-mass to column volume ratio of 500 mg per 3 mL, or equivalent, and elute into a 5-mL volumetric flask. Wash the column with two 1.5-mL portions of Acetonitrile solution, collecting the washings with the eluate, dilute with Acetonitrile solution to volume, and mix. Chromatographic system (see Chromatography 621)— The liquid chromatograph is equipped with a 310-nm detector and a 4.0-mm × 25-cm column that contains 10-µm packing L1. The flow rate is about 1 mL per minute. Chromatograph the Standard solution, and record the peak responses as directed for Procedure: the relative retention times are about 1.0 for hydralazine derivative and 1.5 for hydrazine derivative; and the relative standard deviation for replicate injections is not more than 2.0%. Procedure— Separately inject equal volumes (about 20 µL) of the solution from the Standard solution and the Test solution into the chromatograph, record the chromatograms, and measure the responses for the major peaks. Calculate the percentage of hydrazine in the portion of Hydralazine Hydrochloride taken by the formula: (32.05/104.97)(0.1C/W)(rU / rS), in which 32.05 and 104.97 are the molecular weights of hydrazine and hydrazine dihydrochloride, respectively; C is the concentration, in µg per mL, of hydrazine dihydrochloride in the Standard solution; W is the weight, in mg, of Hydralazine Hydrochloride taken for the Test solution; and rU and rS are the hydrazine peak responses obtained from the Test solution and from the solution from the Standard solution, respectively: not more than 0.001% of hydrazine is found. 本文来源：https://www.dywdw.cn/bb85cd7ceefdc8d376ee32ec.html
下载此文档
搜索文档
阅读：
文档下载
2022-03-29
