霍利威尔MX7扫码回车自动换行

2022-11-12 06:12:10 第一文档网 [ 字体：小中大 ] [

阅读： ] [

说明：文章内容仅供预览，部分内容可能不全。下载后的文档，内容与下面显示的完全一致。下载之前请确认下面内容是否您想要的，是否完整无缺。下载word有问题请添加QQ：admin处理，感谢您的支持与谅解。

【#第一文档网# 导语】以下是®第一文档网的小编为您整理的《霍利威尔MX7扫码回车自动换行》，欢迎阅读！
威尔,霍利,回车,自动,MX7

霍利威尔 MX7

如何设置扫码后自动回车换行设置方法如下： ‘开始’ ‘设置’ ‘控制面板’ ‘Barcode’

里面设置参考下面文档

How to program a Carriage Return on a Supply Chain device Applies To

MX3X, MX3H (MX3Plus), MX5, MX5X, MX5I, MX6, MX7, MX7CS, MX7T (Tecton), MX7L (Tecton CS), MX8, FC300, MX9, MX9CS, MX9HL VM1 Thor, VX3X, VX3H (VX3Plus), VX5, VX6, VX7, VX8 Karv, VX9 Forj HX2, HX3 Pocket PC 2002, Windows Mobile 2003, Windows Mobile 6, Windows Mobile 6.5, Windows CE 4.2, Windows CE 5, Windows CE 6, Windows Embedded Standard 2009, Windows XP, Windows 7 RFTerm Question/Problem

How to program a Carriage Return on a Supply Chain device? How to program an automatic 'Enter' after each read bar code on a Supply Chain device? Resolution

In the Wedge software on Windows CE and Windows Mobile devices:

Go to 'Start' > 'Settings' > 'Control Panel' For Windows Mobile: 'Start' > 'Settings' > 'System'. Click on 'Data Collection' or 'Scanner'. Click on the 'Barcode' or 'Data Options' tab. Click on

'SymbologySettings'. Check the 'Add' box. Enter ' ' without quotes into the 'Suffix' box. ^M Click OK to confirm and exit all windows. In RFTerm on any device:

Click on 'Session' > 'Configure' or press 'control, Shift, N'. Scroll to the 'Barcode' tab. In the 'Barcode Postamble' box, type ' ' (without the quotes). ^M Click OK to confirm. Reboot the terminal make the change active.

本文来源：https://www.dywdw.cn/e327056f306c1eb91a37f111f18583d049640fd3.html